You can be your own mechanic!

Even after a nasty face-plant, getting your bike back on the trail is easier than you think.

While some of you may not have a million acres of land to ride in, breaking down in your local park my require a walk out to the truck. But in many cases, that can be avoided with a little know-how. Most things are still going to require a professional mechanic, if you take care of your bike from day one, you can maintain it well and minimize the trips to the shop. You can even be your own bike mechanic and save a lot of money. Here are some tips for do-it-yourself -bike repair:

Keep Your bicycle Spic and Span

Do you remember how your bike looked when you first bought it? Yes, it was brand new and shiny. To maintain that look, make sure you keep your bicycle clean. Just get a cloth, a bucket of warm water with a bit of detergent, and you can give your bicycle a brand new look. You should know how to clean the tricky parts so you don’t smash them up.

Keep Your bicycle Well Lubricated

It’s important to keep your bike lubricated. You don’t want the metal parts to grind against each other and give you a bad biking experience. Make sure you clear up the old lubricant residue before you apply a new one. Layers of old lubricant can prevent the effectiveness of the new layer. The friction between metal parts can cause damage to your bicycle. In such a case, you can take your bicycle to the bike shop.

Keep a Regular Check on the Wheels

Surprisingly, most bike owners forget to pay attention to the most important part of the bike, the wheels. It is the wheels that are most used and come in contact with the road. Make sure to check regularly for a flat tire to avoid any inconvenience during the ride. Also, check for any mud build up, or other damage to the wheels.

Store Your bicycle Properly

If your part of the world has bad climate, where your bicycle can go all rusty in no time, make sure you store it properly. Storage of the bicycle is an extremely important part of bike maintenance. Bad weather can cause damage to your two-wheeler. If you think your bike is in bad condition, instantly take it to the bike shop.

Know Your bicycle

Each bicycle is different. The maintenance requirement is also different. You should know how your bike works and how frequently you need to maintain it. There may be some parts of the bike that require more frequent maintenance than others. Be your own bike repair person and keep a regular check on your bike to avoid any visits to the shop that can cost you hundreds of dollars.

Too simple, but what now?

These are the simple more common sense principles – but what about the more complicated maintenance items – well fret not, thanks to The Gravity Garage – we will be putting on simple videos and articles on how to “Get it Done!”

Photography with Action Cameras

The GoPro is a very tiny action “video” camera with a very tiny sensor and a very tiny lens. It will in no way compete with a $5,000 DSLR with an equally expensive $5,000 lens attached. It’s not even going to compete with a $500 DSLR/Lens Kit. It’s just not going to happen! And by understanding the limitations, will also set acceptable expectations.

read more

Adobe Lightroom Basics

I will cover, Importing, Keyword Tagging, Titles/Descriptions, Sorting, Filtering, Selecting, Editing and Exporting. This is great for any skill level for anyone shooting digital photos of any kind. 

read more

DIY Energy Bars!

A competitive cyclist’s relationship with food can be summed up in one word: intense. Our love of food runs deep and plays a role in almost every aspect of cycling. A hearty meal is the reward for a long day in the saddle.

read more

Buying A Used Bike

Looking to purchase a used bike, learn the tail-tell signs of an overly used bike are. Not knowing can cost you hundreds of dollars more in new components.

read more

Stans NoTubes Conversion

I first remove the factory rim tape and installed one layer of the Stan's yellow tape making sure that I covered all the nipple holes. The instructions...

read more

Replacing Your Chain

Replacing your chain does not have to be difficult. There are many videos there talking about the math to get the correct length - and they can be rather confusing....

read more

Big Red 3.5 Gallon Parts Washer

Review: Big Red 3.5 Gallon Parts Washer Dealing with mud, dirt, sand and even snow - parts on your bike are going to get dirty and sometimes a simple washing is just not going to cut it. It is also recommended that at least once a year you break down your...

read more

Washing Your Bike

Very often bikes come to me to be tuned and they are totally dirty. Washing your bike is essential – to keep things working as expected.When washing your bike, this is the time to pay attention to all your components and make sure they are tight, no cracks or anything is broken or warn and needing replaced. Speaking of tight, you need to know how your bike is put together, take your time and get intimate with all your components – so that when something does start to get lose – and they will – you’ll be able top catch it before any damage can occur.

read more